Seco introduces W-MF4 insert geometry for higher performance in stainless steels
596Hits2015-01-23 11:31:43 Source:Seco Carbide inserts,Seco cutting tools,Seco CNC cutting tools (Shandong) Co., Ltd.
Fagersta, April 2014 - To further improve the output manufacturers can obtain when machining stainless steels, Seco has developed and released the new dedicated W-Mf4 insert geometry. A high-feed (wiper) geometry, W-MF4 enables the high performance levels that have been available for other metals, but were difficult to attain when cutting stainless steels.
With the new high-feed wiper geometry, manufacturers can significantly increase surface finish quality, cycle times or both, depending on the priorities and demands of their specific application. W-MF4 is available in Duratomic® grades TM2000 and TM4000 and PVD-coated grade CP500. http://www.secotools.com/CorpWeb/Press%20Centre/2014/W-MF4.zip
TM2000 and TM4000 provide excellent turning performance in stainless steels through Duratomic coating technology. CP500 is a universal grade that achieves strong results across a wide variety of workpiece materials due its unique PVD coating.
For more information on the W-MF4 insert geometry, please contact a local Seco representative or visit http://www.secotools.com/en/Global/Products/Turning/General-Turning/W-MF4/
